Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
The Art of Service Standard Requirements Self Assessments

3D Printing of Consumable Personal Products Toolkit: best-practice templates, step-by-step work plans and maturity diagnostics

$249.00

3D Printing of Consumable Personal Products Toolkit: best-practice templates, step-by-step work plans and maturity diagnostics

$249.00

Availability:
Downloadable Resources, Instant Access

Product Description

Save time, empower your teams and effectively upgrade your processes with access to this practical 3D Printing of Consumable Personal Products Toolkit and guide. Address common challenges with best-practice templates, step-by-step work plans and maturity diagnostics for any 3D Printing of Consumable Personal Products related project.

Download the Toolkit and in Three Steps you will be guided from idea to implementation results.

The Toolkit contains the following practical and powerful enablers with new and updated 3D Printing of Consumable Personal Products specific requirements:


STEP 1: Get your bearings

Start with...

  • The latest quick edition of the 3D Printing of Consumable Personal Products Self Assessment book in PDF containing 49 requirements to perform a quickscan, get an overview and share with stakeholders.

Organized in a data driven improvement cycle RDMAICS (Recognize, Define, Measure, Analyze, Improve, Control and Sustain), check the…

  • Example pre-filled Self-Assessment Excel Dashboard to get familiar with results generation

Then find your goals...


STEP 2: Set concrete goals, tasks, dates and numbers you can track

Featuring 813 new and updated case-based questions, organized into seven core areas of process design, this Self-Assessment will help you identify areas in which 3D Printing of Consumable Personal Products improvements can be made.

Examples; 10 of the 813 standard requirements:

  1. What are the known security controls?

  2. What needs improvement?

  3. At what point will vulnerability assessments be performed once 3D Printing of Consumable Personal Products is put into production (e.g., ongoing Risk Management after implementation)?

  4. Were Pareto charts (or similar) used to portray the heavy hitters (or key sources of variation)?

  5. Does 3D Printing of Consumable Personal Products create potential expectations in other areas that need to be recognized and considered?

  6. Are the units of measure consistent?

  7. What knowledge, skills and characteristics mark a good 3D Printing of Consumable Personal Products project manager?

  8. Marketing budgets are tighter, consumers are more skeptical, and social media has changed forever the way we talk about 3D Printing of Consumable Personal Products. How do we gain traction?

  9. How would one define 3D Printing of Consumable Personal Products leadership?

  10. What key measures identified indicate the performance of the stakeholder process?


Complete the self assessment, on your own or with a team in a workshop setting. Use the workbook together with the self assessment requirements spreadsheet:

  • The workbook is the latest in-depth complete edition of the 3D Printing of Consumable Personal Products book in PDF containing 813 requirements, which criteria correspond to the criteria in...

Your 3D Printing of Consumable Personal Products self-assessment dashboard which gives you your dynamically prioritized projects-ready tool and shows your organization exactly what to do next:

  • The Self-Assessment Excel Dashboard; with the 3D Printing of Consumable Personal Products Self-Assessment and Scorecard you will develop a clear picture of which 3D Printing of Consumable Personal Products areas need attention, which requirements you should focus on and who will be responsible for them:

    • Shows your organization instant insight in areas for improvement: Auto generates reports, radar chart for maturity assessment, insights per process and participant and bespoke, ready to use, RACI Matrix
    • Gives you a professional Dashboard to guide and perform a thorough 3D Printing of Consumable Personal Products Self-Assessment
    • Is secure: Ensures offline data protection of your Self-Assessment results
    • Dynamically prioritized projects-ready RACI Matrix shows your organization exactly what to do next:

 

STEP 3: Implement, Track, follow up and revise strategy

The outcomes of STEP 2, the self assessment, are the inputs for STEP 3; Start and manage 3D Printing of Consumable Personal Products projects with the 62 implementation resources:

  • 62 step-by-step 3D Printing of Consumable Personal Products Project Management Form Templates covering over 6000 3D Printing of Consumable Personal Products project requirements and success criteria:

Examples; 10 of the check box criteria:

  1. Risk Audit: When your organization is entering into a major contract, does it seek legal advice?

  2. Requirements Management Plan: Do you understand the role that each stakeholder will play in the requirements process?

  3. Scope Management Plan: Will anyone else be involved in verifying the deliverables?

  4. Cost Management Plan: Are the results of quality assurance reviews provided to affected groups & individuals?

  5. Executing Process Group: What are crucial elements of successful 3D Printing of Consumable Personal Products project plan execution?

  6. Team Operating Agreement: Must your team members rely on the expertise of other members to complete tasks?

  7. Cost Management Plan: Vac -variance at completion, how much over/under budget do you expect to be?

  8. Project Schedule: Are there activities that came from a template or previous 3D Printing of Consumable Personal Products project that are not applicable on this phase of this 3D Printing of Consumable Personal Products project?

  9. Monitoring and Controlling Process Group: What will you do to minimize the impact should a risk event occur?

  10. Change Log: Will the 3D Printing of Consumable Personal Products project fail if the change request is not executed?

 
Step-by-step and complete 3D Printing of Consumable Personal Products Project Management Forms and Templates including check box criteria and templates.

1.0 Initiating Process Group:

  • 1.1 3D Printing of Consumable Personal Products project Charter
  • 1.2 Stakeholder Register
  • 1.3 Stakeholder Analysis Matrix


2.0 Planning Process Group:

  • 2.1 3D Printing of Consumable Personal Products project Management Plan
  • 2.2 Scope Management Plan
  • 2.3 Requirements Management Plan
  • 2.4 Requirements Documentation
  • 2.5 Requirements Traceability Matrix
  • 2.6 3D Printing of Consumable Personal Products project Scope Statement
  • 2.7 Assumption and Constraint Log
  • 2.8 Work Breakdown Structure
  • 2.9 WBS Dictionary
  • 2.10 Schedule Management Plan
  • 2.11 Activity List
  • 2.12 Activity Attributes
  • 2.13 Milestone List
  • 2.14 Network Diagram
  • 2.15 Activity Resource Requirements
  • 2.16 Resource Breakdown Structure
  • 2.17 Activity Duration Estimates
  • 2.18 Duration Estimating Worksheet
  • 2.19 3D Printing of Consumable Personal Products project Schedule
  • 2.20 Cost Management Plan
  • 2.21 Activity Cost Estimates
  • 2.22 Cost Estimating Worksheet
  • 2.23 Cost Baseline
  • 2.24 Quality Management Plan
  • 2.25 Quality Metrics
  • 2.26 Process Improvement Plan
  • 2.27 Responsibility Assignment Matrix
  • 2.28 Roles and Responsibilities
  • 2.29 Human Resource Management Plan
  • 2.30 Communications Management Plan
  • 2.31 Risk Management Plan
  • 2.32 Risk Register
  • 2.33 Probability and Impact Assessment
  • 2.34 Probability and Impact Matrix
  • 2.35 Risk Data Sheet
  • 2.36 Procurement Management Plan
  • 2.37 Source Selection Criteria
  • 2.38 Stakeholder Management Plan
  • 2.39 Change Management Plan


3.0 Executing Process Group:

  • 3.1 Team Member Status Report
  • 3.2 Change Request
  • 3.3 Change Log
  • 3.4 Decision Log
  • 3.5 Quality Audit
  • 3.6 Team Directory
  • 3.7 Team Operating Agreement
  • 3.8 Team Performance Assessment
  • 3.9 Team Member Performance Assessment
  • 3.10 Issue Log


4.0 Monitoring and Controlling Process Group:

  • 4.1 3D Printing of Consumable Personal Products project Performance Report
  • 4.2 Variance Analysis
  • 4.3 Earned Value Status
  • 4.4 Risk Audit
  • 4.5 Contractor Status Report
  • 4.6 Formal Acceptance


5.0 Closing Process Group:

  • 5.1 Procurement Audit
  • 5.2 Contract Close-Out
  • 5.3 3D Printing of Consumable Personal Products project or Phase Close-Out
  • 5.4 Lessons Learned

 

Results

With this Three Step process you will have all the tools you need for any 3D Printing of Consumable Personal Products project with this in-depth 3D Printing of Consumable Personal Products Toolkit.

In using the Toolkit you will be better able to:

  • Diagnose 3D Printing of Consumable Personal Products projects, initiatives, organizations, businesses and processes using accepted diagnostic standards and practices
  • Implement evidence-based best practice strategies aligned with overall goals
  • Integrate recent advances in 3D Printing of Consumable Personal Products and put process design strategies into practice according to best practice guidelines

Defining, designing, creating, and implementing a process to solve a business challenge or meet a business objective is the most valuable role; In EVERY company, organization and department.

Unless you are talking a one-time, single-use project within a business, there should be a process. Whether that process is managed and implemented by humans, AI, or a combination of the two, it needs to be designed by someone with a complex enough perspective to ask the right questions. Someone capable of asking the right questions and step back and say, 'What are we really trying to accomplish here? And is there a different way to look at it?'

This Toolkit empowers people to do just that - whether their title is entrepreneur, manager, consultant, (Vice-)President, CxO etc... - they are the people who rule the future. They are the person who asks the right questions to make 3D Printing of Consumable Personal Products investments work better.

This 3D Printing of Consumable Personal Products All-Inclusive Toolkit enables You to be that person.

 

Includes lifetime updates

Every self assessment comes with Lifetime Updates and Lifetime Free Updated Books. Lifetime Updates is an industry-first feature which allows you to receive verified self assessment updates, ensuring you always have the most accurate information at your fingertips.

Product Reviews

Find Similar Products by Category