3D Printing With Bound Materials Toolkit: best-practice templates, step-by-step work plans and maturity diagnostics

$249.00
(46 reviews) Write a Review
Availability:
Downloadable Resources, Instant Access

Save time, empower your teams and effectively upgrade your processes with access to this practical 3D Printing With Bound Materials Toolkit and guide. Address common challenges with best-practice templates, step-by-step work plans and maturity diagnostics for any 3D Printing With Bound Materials related project.

Download the Toolkit and in Three Steps you will be guided from idea to implementation results.

The Toolkit contains the following practical and powerful enablers with new and updated 3D Printing With Bound Materials specific requirements:


STEP 1: Get your bearings

Start with...

  • The latest quick edition of the 3D Printing With Bound Materials Self Assessment book in PDF containing 49 requirements to perform a quickscan, get an overview and share with stakeholders.

Organized in a data driven improvement cycle RDMAICS (Recognize, Define, Measure, Analyze, Improve, Control and Sustain), check the…

  • Example pre-filled Self-Assessment Excel Dashboard to get familiar with results generation

Then find your goals...


STEP 2: Set concrete goals, tasks, dates and numbers you can track

Featuring 846 new and updated case-based questions, organized into seven core areas of process design, this Self-Assessment will help you identify areas in which 3D Printing With Bound Materials improvements can be made.

Examples; 10 of the 846 standard requirements:

  1. Is the optimal solution selected based on testing and analysis?

  2. How frequently do we track measures?

  3. Will 3D Printing With Bound Materials deliverables need to be tested and, if so, by whom?

  4. How do controls support value?

  5. Against what alternative is success being measured?

  6. A compounding model resolution with available relevant data can often provide insight towards a solution methodology; which 3D Printing With Bound Materials models, tools and techniques are necessary?

  7. Is maximizing 3D Printing With Bound Materials protection the same as minimizing 3D Printing With Bound Materials loss?

  8. How can we become more high-tech but still be high touch?

  9. What is our formula for success in 3D Printing With Bound Materials ?

  10. What happens at this company when people fail?


Complete the self assessment, on your own or with a team in a workshop setting. Use the workbook together with the self assessment requirements spreadsheet:

  • The workbook is the latest in-depth complete edition of the 3D Printing With Bound Materials book in PDF containing 846 requirements, which criteria correspond to the criteria in...

Your 3D Printing With Bound Materials self-assessment dashboard which gives you your dynamically prioritized projects-ready tool and shows your organization exactly what to do next:

  • The Self-Assessment Excel Dashboard; with the 3D Printing With Bound Materials Self-Assessment and Scorecard you will develop a clear picture of which 3D Printing With Bound Materials areas need attention, which requirements you should focus on and who will be responsible for them:

    • Shows your organization instant insight in areas for improvement: Auto generates reports, radar chart for maturity assessment, insights per process and participant and bespoke, ready to use, RACI Matrix
    • Gives you a professional Dashboard to guide and perform a thorough 3D Printing With Bound Materials Self-Assessment
    • Is secure: Ensures offline data protection of your Self-Assessment results
    • Dynamically prioritized projects-ready RACI Matrix shows your organization exactly what to do next:

 

STEP 3: Implement, Track, follow up and revise strategy

The outcomes of STEP 2, the self assessment, are the inputs for STEP 3; Start and manage 3D Printing With Bound Materials projects with the 62 implementation resources:

  • 62 step-by-step 3D Printing With Bound Materials Project Management Form Templates covering over 6000 3D Printing With Bound Materials project requirements and success criteria:

Examples; 10 of the check box criteria:

  1. Monitoring and Controlling Process Group: A 3D Printing With Bound Materials project management team of two has 8 key stakeholders to work with. How many potential communications channels exist on the 3D Printing With Bound Materials project?

  2. WBS Dictionary: Evaluate the performance of operating organizations?

  3. Activity Duration Estimates: What is the difference between using brainstorming and the Delphi technique for risk identification?

  4. Activity Duration Estimates: When would a milestone chart be used instead of a bar char?

  5. Lessons Learned: Did the 3D Printing With Bound Materials project improve the team members reputations, skills, personal development?

  6. Source Selection Criteria: How and when do you enter into 3D Printing With Bound Materials project Procurement Management?

  7. Procurement Audit: Where funding is being arranged by borrowings, do these have the necessary approval and legal authority?

  8. Responsibility Assignment Matrix: Can the contractor substantiate work package and planning package budgets?

  9. Team Member Performance Assessment: How do you currently explain your results in the teams achievement?

  10. Procurement Management Plan: Has an organization readiness assessment been conducted?

 
Step-by-step and complete 3D Printing With Bound Materials Project Management Forms and Templates including check box criteria and templates.

1.0 Initiating Process Group:

  • 1.1 3D Printing With Bound Materials project Charter
  • 1.2 Stakeholder Register
  • 1.3 Stakeholder Analysis Matrix


2.0 Planning Process Group:

  • 2.1 3D Printing With Bound Materials project Management Plan
  • 2.2 Scope Management Plan
  • 2.3 Requirements Management Plan
  • 2.4 Requirements Documentation
  • 2.5 Requirements Traceability Matrix
  • 2.6 3D Printing With Bound Materials project Scope Statement
  • 2.7 Assumption and Constraint Log
  • 2.8 Work Breakdown Structure
  • 2.9 WBS Dictionary
  • 2.10 Schedule Management Plan
  • 2.11 Activity List
  • 2.12 Activity Attributes
  • 2.13 Milestone List
  • 2.14 Network Diagram
  • 2.15 Activity Resource Requirements
  • 2.16 Resource Breakdown Structure
  • 2.17 Activity Duration Estimates
  • 2.18 Duration Estimating Worksheet
  • 2.19 3D Printing With Bound Materials project Schedule
  • 2.20 Cost Management Plan
  • 2.21 Activity Cost Estimates
  • 2.22 Cost Estimating Worksheet
  • 2.23 Cost Baseline
  • 2.24 Quality Management Plan
  • 2.25 Quality Metrics
  • 2.26 Process Improvement Plan
  • 2.27 Responsibility Assignment Matrix
  • 2.28 Roles and Responsibilities
  • 2.29 Human Resource Management Plan
  • 2.30 Communications Management Plan
  • 2.31 Risk Management Plan
  • 2.32 Risk Register
  • 2.33 Probability and Impact Assessment
  • 2.34 Probability and Impact Matrix
  • 2.35 Risk Data Sheet
  • 2.36 Procurement Management Plan
  • 2.37 Source Selection Criteria
  • 2.38 Stakeholder Management Plan
  • 2.39 Change Management Plan


3.0 Executing Process Group:

  • 3.1 Team Member Status Report
  • 3.2 Change Request
  • 3.3 Change Log
  • 3.4 Decision Log
  • 3.5 Quality Audit
  • 3.6 Team Directory
  • 3.7 Team Operating Agreement
  • 3.8 Team Performance Assessment
  • 3.9 Team Member Performance Assessment
  • 3.10 Issue Log


4.0 Monitoring and Controlling Process Group:

  • 4.1 3D Printing With Bound Materials project Performance Report
  • 4.2 Variance Analysis
  • 4.3 Earned Value Status
  • 4.4 Risk Audit
  • 4.5 Contractor Status Report
  • 4.6 Formal Acceptance


5.0 Closing Process Group:

  • 5.1 Procurement Audit
  • 5.2 Contract Close-Out
  • 5.3 3D Printing With Bound Materials project or Phase Close-Out
  • 5.4 Lessons Learned

 

Results

With this Three Step process you will have all the tools you need for any 3D Printing With Bound Materials project with this in-depth 3D Printing With Bound Materials Toolkit.

In using the Toolkit you will be better able to:

  • Diagnose 3D Printing With Bound Materials projects, initiatives, organizations, businesses and processes using accepted diagnostic standards and practices
  • Implement evidence-based best practice strategies aligned with overall goals
  • Integrate recent advances in 3D Printing With Bound Materials and put process design strategies into practice according to best practice guidelines

Defining, designing, creating, and implementing a process to solve a business challenge or meet a business objective is the most valuable role; In EVERY company, organization and department.

Unless you are talking a one-time, single-use project within a business, there should be a process. Whether that process is managed and implemented by humans, AI, or a combination of the two, it needs to be designed by someone with a complex enough perspective to ask the right questions. Someone capable of asking the right questions and step back and say, 'What are we really trying to accomplish here? And is there a different way to look at it?'

This Toolkit empowers people to do just that - whether their title is entrepreneur, manager, consultant, (Vice-)President, CxO etc... - they are the people who rule the future. They are the person who asks the right questions to make 3D Printing With Bound Materials investments work better.

This 3D Printing With Bound Materials All-Inclusive Toolkit enables You to be that person.

 

Includes lifetime updates

Every self assessment comes with Lifetime Updates and Lifetime Free Updated Books. Lifetime Updates is an industry-first feature which allows you to receive verified self assessment updates, ensuring you always have the most accurate information at your fingertips.

46 Reviews Hide Reviews Show Reviews

  • 5
    Hi everybody, The book is amazing, I will read it deeper during my next holidays. Thanks and regards

    Posted by Diego P. on 6th Sep 2018

    Diego P. Head of BDA Business Unit

  • 5
    DAVID S. Director Organisational performance

    Posted by DAVID S. on 6th Sep 2018

    Honestly - at the extremely low outlay - the capacity to accelerate your journey, increase productivity and be a more informed buyer (when combined with what actual business problems you are trying to solve) I would be extremely hard pressed to not undertake it.

  • 5
    I will use everything extensively to prepare for an audit scheduled in Dec and Jan for an important automotive customer.

    Posted by Bruno C. on 4th Sep 2018

    Bruno C. ICT Director

  • 5
    I have gone through the array of your works and they are simply awesome! Great job you have been doing.

    Posted by KENNETH O. on 4th Sep 2018

    KENNETH O. MD/CEO, Emerging Media

  • 5
    CARSTEN B. Experienced safety and quality enabler

    Posted by CARSTEN B. on 3rd Sep 2018

    So far I have only had time to browse it very superficially, but form that it looks very comprehensive and at the same time practical. As soon as I find time I will do a short item on it on my literature pages and point risk management professionals in your direction. Have a great day, and all the best!!

  • 5
    Thanks for your service! That's really appreciated!

    Posted by HARRY M. on 3rd Sep 2018

    HARRY M. Enterprise Architect

  • 5
    This is great!

    Posted by GREG C, on 2nd Sep 2018

    GREG C. CEO Managed Service Provider

  • 5
    I really like the format. Simple but quite powerful. I will make sure to share my views with Amazon. Thanks again.

    Posted by CARL M. on 2nd Sep 2018

    CARL M. Senior Solutions Architect

  • 5
    The Self-Assessment is a great tool to gather feedback and input from others, especially challenges, and things to watch out for. Very helpful!

    Posted by JULIE M. on 5th Aug 2018

    JULIE M. AWS Solution Architect