Skip to main content
Image coming soon

Advanced Threat Detection for Industrial Control Systems

$199.00
Adding to cart… The item has been added

A tailored course, built for your situation

Advanced Threat Detection for Industrial Control Systems

Close critical gaps in network security with a structured, implementation-first approach

$199 one-time
24-hour access provisioning 30-day money-back guarantee Hand-built implementation playbook
12 modules. 12 chapters per module. 144 chapters total.
12 modules, each with 12 chapters (144 chapters total), text-based, plus downloadable templates and a hand-built implementation playbook delivered alongside course access.
Threats in industrial environments don’t behave like IT risks, and your current tools might not see them coming.

The situation this course is for

In complex industrial settings, standard vulnerability scans miss protocol-level anomalies and logic layer attacks. Threats hide in plain sight: misconfigured PLCs, unmonitored Modbus traffic, or rogue devices introduced during maintenance cycles. Detection is further delayed because security teams lack visibility into operational networks, while operations teams lack threat context. The result? Extended exposure, compliance drift, and response delays when incidents occur. This gap grows wider with every infrastructure expansion or integration.

Who this is for

A technical lead or systems engineer in a manufacturing, utilities, or industrial environment who owns or influences network security posture and incident response planning.

Who this is not for

This is not for CISOs looking for board-level strategy, nor for IT generalists without access to control system networks.

What you walk away with

  • Identify high-risk blind spots in industrial protocols and legacy systems
  • Deploy lightweight detection rules tailored to OT environments
  • Map real-time alerts to response workflows without disrupting operations
  • Integrate security monitoring into change management and vendor access cycles
  • Reduce mean time to detect and contain threats in hybrid IT/OT networks

The 12 modules (with all 144 chapters)

Module 1. Mapping the Industrial Attack Surface
Define critical nodes in control networks using asset discovery and protocol analysis. Understand how attackers pivot from IT to OT layers.
12 chapters in this module
  1. Identify all connected devices
  2. Classify by critical function
  3. Map communication protocols
  4. Detect unauthorized connections
  5. Assess firmware versions
  6. Log network topology changes
  7. Flag end-of-life systems
  8. Monitor vendor access points
  9. Track physical port usage
  10. Baseline normal traffic patterns
  11. Discover shadow OT assets
  12. Document asset ownership
Module 2. Protocol-Specific Threat Modeling
Analyze common industrial protocols for exploitable behaviors. Build models that reflect real-world attack paths.
12 chapters in this module
  1. Understand Modbus vulnerabilities
  2. Test for CIP misconfigurations
  3. Exploit Profinet weaknesses
  4. Scan for DNP3 exposure
  5. Abuse OPC DA defaults
  6. Manipulate MQTT topics
  7. Spoof BACnet devices
  8. Flood IEC 60870-5-104
  9. Inject false SCADA data
  10. Bypass protocol authentication
  11. Log anomalous command patterns
  12. Prioritize high-impact flaws
Module 3. Passive Network Monitoring Setup
Deploy sensors without disrupting operations. Capture and analyze traffic using non-intrusive methods.
12 chapters in this module
  1. Choose monitoring locations
  2. Install network taps safely
  3. Configure port mirroring
  4. Deploy passive sniffers
  5. Filter by protocol type
  6. Aggregate logs centrally
  7. Preserve packet timing
  8. Mask sensitive payloads
  9. Verify sensor uptime
  10. Test detection coverage
  11. Alert on unknown devices
  12. Validate data integrity
Module 4. Building Detection Logic for OT
Create rules that catch malicious activity without generating noise. Focus on precision over volume.
12 chapters in this module
  1. Write Modbus anomaly rules
  2. Detect CIP service abuse
  3. Flag Profinet configuration changes
  4. Identify DNP3 command floods
  5. Spot OPC UA tunneling
  6. Catch MQTT topic hijacking
  7. Alert on BACnet spoofing
  8. Log IEC protocol errors
  9. Track PLC program changes
  10. Monitor HMI login attempts
  11. Detect unauthorized firmware uploads
  12. Baseline command frequency
Module 5. Integrating with Existing Security Tools
Extend SIEM and SOAR capabilities to cover OT-specific events. Enable cross-environment correlation.
12 chapters in this module
  1. Forward OT logs to SIEM
  2. Normalize event formats
  3. Map OT assets to IT inventory
  4. Correlate user access events
  5. Trigger SOAR playbooks
  6. Enrich alerts with context
  7. Set severity thresholds
  8. Automate ticket creation
  9. Notify operations teams
  10. Escalate critical findings
  11. Sync with CMDB
  12. Audit response actions
Module 6. Responding to Active Threats
Execute containment without disrupting production. Coordinate between IT and operations teams.
12 chapters in this module
  1. Isolate affected segments
  2. Preserve forensic data
  3. Notify operations leads
  4. Document incident timeline
  5. Suspend remote access
  6. Block malicious IPs
  7. Reimage compromised devices
  8. Restore from clean backups
  9. Verify system integrity
  10. Update detection rules
  11. Report to leadership
  12. Conduct post-mortem
Module 7. Vendor and Contractor Risk Control
Secure third-party access without sacrificing agility. Enforce least privilege in maintenance workflows.
12 chapters in this module
  1. Define vendor access levels
  2. Require multi-factor auth
  3. Limit network scope
  4. Enforce time-bound sessions
  5. Monitor contractor activity
  6. Audit configuration changes
  7. Review access logs
  8. Require pre-visit approvals
  9. Scan contractor devices
  10. Enforce patch compliance
  11. Terminate stale sessions
  12. Report access violations
Module 8. Firmware and Configuration Hardening
Reduce attack surface through secure baselines. Apply consistent settings across PLCs and HMIs.
12 chapters in this module
  1. Disable unused services
  2. Change default passwords
  3. Enable secure boot
  4. Lock down admin interfaces
  5. Apply firmware updates
  6. Verify digital signatures
  7. Enforce configuration drift detection
  8. Backup known-good states
  9. Restrict USB access
  10. Audit configuration changes
  11. Enforce change control
  12. Document approved versions
Module 9. Physical Security and Access Points
Protect control systems from local tampering. Secure physical interfaces and maintenance ports.
12 chapters in this module
  1. Lock control cabinets
  2. Monitor physical access logs
  3. Disable unused ports
  4. Install tamper alarms
  5. Audit badge entries
  6. Track maintenance tools
  7. Secure engineering workstations
  8. Enforce clean desk policy
  9. Inspect for rogue devices
  10. Log USB insertions
  11. Restrict local logins
  12. Report suspicious activity
Module 10. Incident Simulation and Drills
Test readiness with realistic scenarios. Improve coordination between teams through practice.
12 chapters in this module
  1. Design tabletop exercises
  2. Simulate PLC attacks
  3. Test alert response time
  4. Evaluate communication flow
  5. Involve operations staff
  6. Measure decision speed
  7. Review detection accuracy
  8. Update response playbooks
  9. Conduct red team tests
  10. Assess containment steps
  11. Document lessons learned
  12. Schedule recurring drills
Module 11. Compliance Mapping and Reporting
Align security controls with industry standards. Generate audit-ready documentation.
12 chapters in this module
  1. Map to NIST SP 800-82
  2. Align with ISA/IEC 62443
  3. Document control implementation
  4. Generate compliance reports
  5. Track control gaps
  6. Plan for audits
  7. Verify evidence collection
  8. Update policies annually
  9. Assign control owners
  10. Report metrics to leadership
  11. Maintain version history
  12. Archive audit trails
Module 12. Sustaining Security Over Time
Maintain vigilance as systems evolve. Build routines that keep defenses current.
12 chapters in this module
  1. Schedule regular reviews
  2. Update threat models
  3. Refresh detection rules
  4. Retrain response teams
  5. Audit vendor access
  6. Scan for new assets
  7. Patch firmware regularly
  8. Monitor for anomalies
  9. Update documentation
  10. Review incident logs
  11. Adjust for system changes
  12. Report to management

How this maps to your situation

  • Expanding industrial infrastructure increases attack surface
  • Recent integration cycles introduce configuration drift
  • Operations teams lack threat visibility
  • Security tools don’t cover OT-specific risks

Before vs. after

Before
Unclear where threats hide in hybrid IT/OT networks, delayed detection, fragmented response workflows
After
Proactive threat visibility, faster containment, coordinated incident response, and sustained compliance

What's included with your purchase

  • 12 modules with 12 chapters each (144 chapters)
  • Downloadable templates and worked examples for every module
  • Hand-built implementation playbook delivered alongside course access
  • 30-day money-back guarantee

Delivery and format

  • Course and learning environment access provisioned within 24 hours of purchase
  • Hand-built implementation playbook delivered alongside course access

Format: Text-based modules and chapters in the Art of Service learning environment, plus downloadable templates and worked examples for every chapter, plus the hand-built implementation playbook delivered alongside course access.

Time investment: Approximately 3 hours per module, designed for implementation alongside regular responsibilities.

If nothing changes
Without structured detection, minor misconfigurations can escalate into operational disruptions. The longer gaps remain, the higher the chance of an undetected breach affecting safety, uptime, or compliance.

How this compares to the alternatives

Unlike generic cybersecurity courses, this program focuses exclusively on industrial control systems, offering precise detection logic, OT-specific templates, and workflows validated in high-availability environments.

Frequently asked

Who is this course designed for?
Engineers and technical leads responsible for securing industrial networks and control systems.
How is the course structured?
12 modules, each containing 12 chapters (144 chapters total).
Do I need access to live systems to benefit?
No, templates and examples are designed to be adapted, whether you're planning, auditing, or actively managing systems.
$199 one-time. Approximately 3 hours per module, designed for implementation alongside regular responsibilities..

Within 24 hours your account in the learning environment is provisioned and the tailored implementation playbook is delivered alongside it.

30-day money-back guarantee· 144 chapters· Hand-built playbook included· Account access within 24 hours
!