Skip to main content
Wireless Networks in Mobile Voip

Wireless Networks in Mobile Voip

$249.00
Toolkit Included:
Includes a practical, ready-to-use toolkit containing implementation templates, worksheets, checklists, and decision-support materials used to accelerate real-world application and reduce setup time.
Your guarantee:
30-day money-back guarantee — no questions asked
How you learn:
Self-paced • Lifetime updates
When you get access:
Course access is prepared after purchase and delivered via email
Who trusts this:
Trusted by professionals in 160+ countries
Adding to cart… The item has been added

This curriculum spans the technical workflows of a multi-phase network modernization initiative, covering the integration of radio access, core, and security systems required to operationalize mobile VoIP across heterogeneous environments, similar to the planning and troubleshooting tasks in large-scale carrier deployments.

Module 1: Radio Access Network Design for VoIP Traffic

  • Selecting LTE vs. 5G NR carrier aggregation configurations to meet VoIP jitter thresholds under mixed-data loads.
  • Configuring eNodeB or gNodeB scheduling priorities to allocate guaranteed QoS bearers for SIP signaling and media streams.
  • Dimensioning PRB (Physical Resource Block) pools to support concurrent VoIP sessions without exceeding 2% packet loss SLA.
  • Implementing TTI bundling in coverage-limited scenarios to maintain VoIP uplink reliability at cell edges.
  • Coordinating inter-site distances and tilt angles in dense urban deployments to minimize handover-induced VoIP packet bursts.
  • Integrating RLC AM (Acknowledged Mode) for SIP signaling while using RLC UM (Unacknowledged Mode) for RTP media to balance latency and reliability.

Module 2: Core Network Integration and IMS Architecture

  • Mapping DSCP markings from wireless UEs to S-GW and P-GW for end-to-end DiffServ policy enforcement.
  • Configuring I-CSCF and S-CSCF failover sequences to maintain SIP registration continuity during core node outages.
  • Implementing Rx and Gx interface policies to dynamically throttle non-VoIP traffic during voice congestion.
  • Deploying topology hiding and topology-agnostic routing in P-CSCF to prevent signaling exposure in roaming scenarios.
  • Integrating ENUM with DNS NAPTR records to resolve E.164 numbers to SIP URIs across carrier boundaries.
  • Enforcing media anchoring via an SBC in the home network to preserve topology and lawful intercept compliance.

Module 3: Handover and Mobility Management

  • Adjusting A3 event hysteresis and time-to-trigger parameters to reduce ping-pong handovers during active VoIP calls.
  • Configuring SRVCC (Single Radio Voice Call Continuity) thresholds to initiate handover from LTE to WCDMA before RSRP drops below -118 dBm.
  • Validating IMS session continuity during inter-MME handovers using re-INVITE with updated contact headers.
  • Coordinating TAU (Tracking Area Update) periodicity to avoid signaling storms during high-density device mobility.
  • Implementing VoWiFi to LTE handover using ANDSF or Hotspot 2.0 policies based on RSSI and load metrics.
  • Testing bearer modification procedures during X2-based handovers to maintain QCI 1 bearer integrity.

Module 4: Voice over Wi-Fi (VoWiFi) Implementation

  • Configuring 802.11r fast transition to reduce Layer 2 handoff delays below 50ms in multi-AP environments.
  • Enforcing WMM (Wi-Fi Multimedia) AC_VI queue mapping for RTP packets on enterprise-grade access points.
  • Integrating ANDSP (Access Network Discovery and Selection Policy) to trigger Wi-Fi calling based on operator-defined rules.
  • Deploying P-GW offload via trusted non-3GPP IP access to route VoWiFi traffic directly to IMS.
  • Validating DTIM intervals and beacon period settings to minimize VoIP client power consumption without degrading jitter.
  • Implementing secure tunneling via IPSec between UE and ePDG to protect SIP and media in untrusted hotspots.

Module 5: Quality of Service and Traffic Prioritization

  • Mapping QCI 1 parameters to DSCP EF (Expedited Forwarding) and IEEE 802.1p COS 5 in backhaul transport networks.
  • Configuring uplink scheduler weights in gNodeB to prioritize VoIP over best-effort traffic during congestion.
  • Implementing pre-emption policies where QCI 1 bearers can displace QCI 9 bearers under radio resource scarcity.
  • Monitoring and tuning RLC retransmission timers to prevent excessive delay in lossy RF conditions.
  • Deploying per-packet header compression (ROHC) to reduce overhead from 40-byte headers to 3–5 bytes on LTE links.
  • Validating end-to-end latency across RAN, transport, and core to remain under 100ms one-way for G.711 calls.

Module 6: Security and Identity Management

  • Enforcing mutual authentication between UE and AKA server using valid SIM-based credentials for IMS registration.
  • Configuring TLS 1.3 between UE and P-CSCF to prevent SIP message interception in public networks.
  • Implementing secure IMSI handling via SUCI (Subscription Concealed Identifier) in 5G NSA deployments.
  • Integrating SBC session policies to detect and block SIP INVITE flooding attacks from rogue endpoints.
  • Deploying STIR/SHAKEN attestation at the ingress SBC for outbound calls to prevent spoofed caller IDs.
  • Rotating IPSec IKEv2 keys between ePDG and UE based on operator-defined lifetime policies.

Module 7: Monitoring, Troubleshooting, and KPIs

  • Collecting and correlating PCAP traces from UE, eNodeB, and SBC to isolate one-way audio issues.
  • Calculating MOS scores using R-factor models derived from packet loss, jitter, and round-trip time measurements.
  • Setting up real-time alarms for RSRQ degradation below -10 dB that correlates with VoIP call drop spikes.
  • Using Diameter AVPs to trace SIP session state across CSCF nodes during registration failures.
  • Validating codec negotiation logs to detect forced downgrades from EVS to AMR-WB under poor RF conditions.
  • Deploying synthetic probes to simulate VoIP calls across cell edges and measure handover success rate.

Module 8: Interoperability and Roaming Scenarios

  • Configuring MTRF (Mobile Terminating Roaming Forwarding) to route inbound SIP INVITEs via home network S-CSCF.
  • Validating Sv interface integration between MME and MSC server for CSFB fallback during IMS unavailability.
  • Testing IMS roaming via visited network P-CSCF with home-routed media to ensure policy consistency.
  • Mapping visited network QoS profiles to home subscriber QCI templates during inter-carrier handover.
  • Enabling GRX/IPX peering with QoS markings preserved for SIP signaling between operators.
  • Resolving interworking issues between legacy CS voice and VoLTE using SCC-AS for call continuity.
!